some errors coupled with TC

issues about thermodynamics and their coupling to MICRESS
Post Reply
sunny
Posts: 22
Joined: Tue Jun 23, 2009 2:57 pm

some errors coupled with TC

Post by sunny » Mon Nov 30, 2009 5:23 pm

Hi, Bernd,

I found some errors on the screen (see the attached figure) when I running the program. I used the thermodynamic database in my simulation. And the diffusion coefficients were entered and assumed as composition-independent. Although this error exists, the program continues, but I do not know whether it will affect the final results.

Could you tell me how to avoid this error?

Thank you in advance!


Sincerely yours,

Sunny
Attachments
Error2.png
Error2.png (27.29 KiB) Viewed 6031 times

Bernd
Posts: 1504
Joined: Mon Jun 23, 2008 9:29 pm

Re: some errors coupled with TC

Post by Bernd » Tue Dec 01, 2009 5:32 pm

Hi sunny,

If these errors you show are the only ones which occur, this most probably is not affecting the results. Typically, if MICRESS runs into serious trouble, a big number of such messages appear and the program gets very slow. Then you should also see traces of that in the output files (.conc*, .driv).

Bernd

sunny
Posts: 22
Joined: Tue Jun 23, 2009 2:57 pm

Re: some errors coupled with TC

Post by sunny » Wed Dec 02, 2009 1:13 pm

Hi, Bernd,

Thank you very much for your reply!

Sunny

Post Reply